Wincomm Launched 24” Medical OR Panel PC WMP-24M-PIS Series

A TW Excellent Award Winner

Wincomm is pleased to announce WMP-24M(-PIS) series – designed specialized for Operating Room at Hospital applications and a 2022 TW excellent Award winner. Equipped with an Intel^® 10th Gen. Core™ i7i5/i3/Celeron processor with 35W, fanless, six-sides IP65 with unique I.O. cover, innovated dual video-in/out ports design, up to 250W power supply and one PCIex16 expansion slot to support medical image processing during operation, the WMP-24M(-PIS) series passed medical latest certification making it ready for various surgery OR applications in the hospital. Moreover, a special power supply inside for WMP-24M-PIS supports to install safely and secure the operation procedure with a good ergonomics design and wins the Taiwan Excellent Award in 2022!


Fig1. Wincomm Comet Lake Medical Grade OR All In One PC WMP-24M-PIS Series Designed for Operating Room All Kinds of Applications in the Hospital.

Optimizing Operating Room Safety by Unique Power Supply Inside

The danger in the operating room comes from power shot down while surgery is on going, so the operating room is required to be easily install and lower electrical interference. The WMP-24M-PIS (Power Supply Inside) is equipped with not only the isolated I.O. interface but also unique power supply inside to avoid this matter.  Moreover, power supply inside design could optimize installation convenience from simple power cord plug with a good ergonomics design. On the other hand, the WMP-24M with external power supply is equipped with embedded battery for your selection to ensure the operating safety as well.
 
                          
          Fig2. The WMP-24M-PIS Series Designed with Power Supply Inside to Allow Direct AC Input and Easy to Installation for OR Setting.
 

Upgraded Performance for Better Healthcare Service
Offering with a choice of Intel 10^th generation processor 35W, either a eight-core 4.4GHz max. i7-10700TE, or six core 3.7GHz max. Core i5-10500TE, with dual channel DDR4 up to 64Gb, and UHD Graphics 630, WMP-24M(-PIS) series improved the performance significantly. The dual storage slots supported with defaulted M.2 NVMe PCIex4 for fast booting and one second 2.5” SSD/HDD slot for selection. With innovated intelligent i-control management design, it supports 35W processor and 1x PCIx16 (20W max.) expansion slot for video capture card under fanless design. The 23.8-inch LCD upgraded to AHVA(=IPS) for WMP-24M-PIS with better color shift performance and optional optical bonding or AG film selection to optimize the image quality. e touch with AG support available on request. In addition, the WMP-24M(-PIS) series provides unique video-in by HDMI and video-out by 1xDP, 1xHDMI, which enables itself as a display versus PC on the same time to optimize operating system. In addition, it is built with optional DICOM part 14 solution for selection.

Leading Full IP65 with Unique I.O. Cover and Rich I.O. Design Dedicated for OR
With defaulted antimicrobial housing to avoid infection in the operating room, and a dust-tight and splash-resistant front bezel is a must to secure the surgery method smoothly. Wincomm upgraded to aluminum white coating, with a full sealed and round angle, IP-65 six sides with special I.O. cover design; Moreover, the special clean key to frozen touch function could be easily clean by various detergents, following the operating safety guidance. WMP-24M(-PIS) series features at rich I.O., including 1 x Equipotential terminal pin (for grounding), 1 for HDMI video input, 2 for display output, HDMI 1.4a, DP respectively, 2 x COM (RS-232/422/485 and RS-232), 2 x RJ45 LAN(1 x 2.5Gbps, 1 x 1Gbps), 4 x USB3.2 Gen. II, and 1 x Audio Jacks (Line in, Line out & Mic in). With unique cable gland under I.O. cover design, it enables maximum I.O. combination for six sides IP65 that makes it ideal to hygienic control for operating room safety requirement.
                                           
                                                    
                                       Fig3. The WMP-24M(-PIS) Series Designed with Optional I.O. Cover that Enables Six Sides IP65.

Latest Medical Certification Granted for Quality Assurance
The WMP-24M(-PIS) series is granted with the latest EMC and Safety certifications include medical MDR (2017/745), EN/UL(60601-1:2012, V3.1)/cUL60601-1:2014 (V3.1)/, FCC/CE(60601-1-2: 2015(V4.0)/VCCI Class B, it is ready to be used in all kinds of hospital applications.

Key Features
• Intel® Comet Lake Core i CPU 
• Power Supply Inside for WMP-24M-PIS
• Optional Embedded Battery for WMP-24M
• Anti-bacteria Aluminum Housing
• 23.8" FHD Diagnostic Panel
• Optical Bonding/AG Film
• Full HD Capture Card
• LAN/COM 4KV Isolated Module
• DICOM Part 14
• Video-In x 1 and DP x 1, HDMI x 1 for Display Output
• Support Windows 11 & fTPM

                                          

                                       
                

Everything, from the Mainboard, BIOS, driver to the mechanical design was designed by Wincomm. Special customer requirements can be fully supported with a long-term supply policy. If you have any product or customization requirements, please contact Wincomm sales (mail: sales_support@wincomm.com.tw). For more product information, please visit the Wincomm website at https://www.wincommusa.com/

About Wincomm

Wincomm is one of Taiwan’s leading manufacturer of industrial computer and embedded computer products. Wincomm designs and develops all in one panel PC, large size all in one digital signage system, rugged box PC and embedded software products for a broad range of industries and applications. Wincomm aims to provide hardware and software integrated solutions for the most variant environments such as industrial automation/ human machine interface control, digital signage / infotainment Kiosk, and medical computing.